Assembled Eurorack modules (shown prices are including 21% VAT)

Orders are shipped on Thursdays, note that I assemble by hand on order and need an average of around 2 weeks to process.

 

€314,00 (ex VAT)

The TEPHRA diode compressor is an handmade limited edition compressor module in a total number available of 130pcs. There will be only 10 available each month and first shipping is in October.

The TEPHRA is a diode bridge based compressor for eurorack with a novel circuitry and a classic sound! The compressor is not a clone of any compressor in the world and is build around an unique schematic which is designed with countless hours of trial and error and many hours of finetuning. This schematic was designed for the MAGMA compressor but further expanded and tweaked for the TEPHRA. The diode bridge compression gives it an unique character. There are many different ways to shape the sound with the TEPHRA, it can be set smooth as a master compressor, it can pump aggressively, it can bring extra warmth or smash everything with a rounded distortion. The controls on the frontpanel will give you control over every little detail in your sound.

16HP
+12V: 39mA
-12V: 33mA

MAGMA

€245.00

MAGMA

€245.00

€202,50 (ex VAT)

A compressor with a novel circuitry with a classic sound!
The Magma uses feedforward diode-bridge compression which gives it an unique character. It is punchy and can pump when set to extreme settings.

The interface is straightforward, easy to use and designed for live performance. The Magma makes it easy to change the entire groove with just a few controls. The glass orb lights up like hot lava and visualizes the amount of compression.

Sculpt your sound in even more detail with the cv and audio side chain inputs. The Magma makes compression creative and fun.

 

Sold out

€310,- (ex VAT)

Sold out! The IC's used in the Sampleslicer are obsolete and therefor it is almost impossible to keep this module in production in batches. These last 8 will have a build time of around one month.

The ultimate realtime sampler for your modular. No, it's not another sampleplayer! It's a realtime cv controlled sampleslice sequencer.

One with features that move it far beyond the scope of a regular sample player.

SENDS

€108.90

SENDS

€108.90

€90,- ex VAT

3 auxiliaries and panning

€281,- (ex VAT)

The BATTLE is a two channel mixer, inspired by the battle mixers of the hiphop scene. The BATTLE is not just a regular two channel mixer; it takes the concept of using a mixer as an instrument, and extends it for Eurorack, with CV inputs and CV and gate outputs.

€355,40 (ex VAT)

PROFADER will as soon as they arrive from the factory, you can order already but have a little bit of patience.


The BATTLE is a two channel mixer, inspired by the battle mixers of the hiphop scene. The BATTLE is not just a regular two channel mixer; it takes the concept of using a mixer as an instrument, and extends it for Eurorack, with CV inputs and CV and gate outputs.

The PROFADER is one of the most sturdy and smooth faders available on the market. Instead of the usual carbon it has two gliding rails and runs on conductive plastic making it very durable and dust resistant.

€103,30 (ex VAT)

Directly insert your record player into your eurorack setup.
The phono amp stage is equiped with RIAA equalization.
The module is build with high quality, low-noise opamps and the famous WIMA caps.

€371,90 (ex VAT)

€413,22 (ex VAT)

PROFADER will be available after mid February, you can order already but have a little bit of patience.

Sold out

VOLTAGE RUNNER (assembled)

€260.00
Sold out
Sold out

VOLTAGE RUNNER (assembled)

€260.00

€215,- (ex VAT)

!Limited edition black with silver print and yellow LEDs!

The VOLTAGE RUNNER is a complex sequencer module for non linear sequencing. It is the sequencer to get if you are into polyrythmic and polymetric music! It is made as an add-on for the TTLFO but also works really good with any other cv source like an ADSR.

    Basicly the VOLTAGE RUNNER is just crazy sequencer which is not your average step sequencer! It runs on an incoming voltage instead of a clock signal, that's where it's name comes from.

    €132,25 (ex VAT)

    The SEEDS is a complex powerful 8 bit oscillator and can be used as a complete synthvoice. Based on different synthese concepts stored in presets.
    The SEEDS is a flasback to the nineties

    Sold out

    TTLFOv2 (assembled)

    €165.00
    Sold out
    Sold out

    TTLFOv2 (assembled)

    €165.00

    €136,40 (ex VAT)

    A clock synced LFO

    €95,80 (ex VAT)

    a basic 8 step sequencer, but you can not have a modular synth without these building blocks!

    Sold out

    Rusty Sampleslicer

    €320.00
    Sold out
    Sold out

    Rusty Sampleslicer

    €320.00

    Limited edition of 9 assembled and numbered modules
    Now only number 3/9 and 4/9 are available

    Sold out

    Enameled TOUCH (one off)

    €75.00
    Sold out
    Sold out

    Enameled TOUCH (one off)

    €75.00

    One off TOUCH with enameled metal frontpanel and brass touch buttons

    Sold out

    MIC MODEL '67

    €120.00
    Sold out
    Sold out

    MIC MODEL '67

    €120.00

    The MIC MODEL '67 is an old microphone made in the seventies for the Dutch airforce. It has a really specific sound and is extremely sensitive. The sensitivity of this mic ads to it's charm as it will opens up many ways to play with feedback in your performance.


    The mic comes in a box including an interface for Eurorack, a spare (modern) electet mic for clean sound and a numbered poster (only 25 where made), riso printed on old newspaper paper.