Tap Tempo LFO

Tap Tempo LFO

It’s not the LFO you already know… It is synced to your master clock, or sync it with the taps you make on the tap button and it is quite useful as a taptempo master clock generator.

 

  • Eurorack size
  • Width: 10HP (50.5mm)
  • +/-12V and 5V
  • compatible with Doepfer
  • skiff-friendly (only 25mm in depth)

Features

  • 8 waveforms
  • multiplier / clock divider
  • horizontal wave distort
  • external clock input
  • CV input for distort amount
  • CV input for multiplier
  • LFO output (selectable between 0/5V and -5V/+5V)
  • clock output

Layout
LED1

Visualised output of the TTLFO

Wave

Select your favourite waveform here

Clock

This is the clock output. The clock output is divided or multiplied by the multiplier from the incoming or tapped tempo

LED2

This led does not show the clock! It light up between two incoming pulses on the trigger input or taps on the tap button

Multiplier

The multiplier divides or multilplies the tempo of the incoming clock or tapped tempo

Tap

Tap in sync with the beat to synchronise the TTLFO. You also can use the TTLFO as a masterclock generator for your modular system

Distort

The distort knob shapes the wave in a horizontal way. Play with it and see what happens!

Multipl

CV input for modulating the multiplier. Turn the multiplier knob fully clockwise to get most effect. This input accepts only 0V-5V cv signals!

Distort in

CV input for modulating the horizontal distortion of the waveform. Turn the distort knob fully clockwise to get most effect. This input accepts only 0V-5V cv signals!

Trigger

Input for syncing the TTLFO to an external clock signal

Out

The cv output of the TTLFO. On the back you can select if it puts out -5V/5V or 0V/5V

Out of stock